A simple and easy OSHA compliance solution. Fulfill your OSHA mandated Lock Out Tag Out written requirement with our fast and easy written Lock Out Tag Out Safety Plan! This written safety plan is simple to follow and easy to complete. Simply fill in your company specific information and print as many copies as you need.
This quality Written Lock Out Tag Out Plan will ensure your company is compliant for the mandated OSHA standard 29 CFR 1910.147. This written plan will reduce your risk of OSHA imposed citations by maintaining the proper and required written Lock Out Tag Out Safety plan. This Lock Out Tag Out plan provides a complete written solution for your company.
Lock-Out/Tag-Out Plan - OSHA Standards 29 CFR 1910.147:
Provides the user with the needed written plan for establishing the requirements for the control of hazardous energy program. It covers protection requirements for all types of hazardous energy. Numerous editable safety forms included.
BASIS:
Approximately three million workers in the United States on a daily basis, face extreme risk from uncontrolled energy when servicing machinery. Serious injury or death can be the result. Typical non-lethal injuries include fractures, lacerations, contusions, amputations, puncture wounds, electric shock, and falls. The average lost time for injuries runs approximately 24 days. The Occupational Safety and Health Administration (OSHA) estimates that approximately 120 fatalities and approximately 28,000 serious and 32,000 minor injuries each year could be prevented if proper lockout/tag-out procedures at job sites are initiated. The OSHA Control of Hazardous Energy Sources Standard establishes uniform requirements to ensure that the hazards of uncontrolled energy in U.S. workplaces are evaluated, safety procedures implemented, and that the proper hazard information is transmitted to all affected workers.
Editable safety forms included with program are:
Employees exposed to asbestos at or above the permissible exposure levels. Employees who perform housekeeping operations in areas that contain ACM and PACM.
Editable safety forms included with program are:
a. Control of Hazardous Energy Sources (Lockout/Tag-out) Plan
b. Determination and Assessment
c. Machine Equipment Listing
d. Lockout Procedure Review
e. Protective Measure Determination
f. Lockout Procedure Model
g. Equipment Safety Inspection
h. Over 20 Safety Documentation and Record Keeping Forms
